How To Choose The Best Shockwave Heat Shield?

Staying Cool: Mossberg shockwave or Tac-14 commonly comes with heating issues and the only way to improve its performance is by adding a heat shield.

If you own a mossberg shockwave or tac-14 you are going to realize that these 12 ga short barreled rifles are bad news. I have to admit they are short and Spartan, which makes them relatively easy to maneuver with for home protection or as a truck rifle. That said, the condensed size also makes the barrel very hot after firing a few shots to the actual size of nothing much. In still target shooting, rapid fire situations or competitions, that heat you feel soon becomes uncomfortable; it can be hard to handle your firearm.

That is where an aftermarket Shockwave Heat Shield can come in a huge way. The inclusion of the accessory heat shield increases an insulated airspace between your hand and the barrel in holding and controlling your Shockwave or Tac-14 without burning your hands. A proper heat shield dissipates and reflects heat and gases back into the air so the palms of your hands are not burning when you pull the trigger.

 

There are a few things to look for when choosing a heat shield:

That is, it must have heat resistance – Tac-14 Heat Shield is made of aluminum or stainless steel – a pair of metals that can take a beating from multiple firings. Further shielding is also applied to the outer surface of the grip as an insulating layer.

Custom fit – You want a heat shield that will perfectly fit your Mossberg Shockwave or Tac-14’s barrel and action for better heat protection. A loose coupling exposes hotspots which gives the firmware an unfriendly environment to operate in for an extended period.

Accessories – Some heat shields come along with a picatinny or M-LOK rail to allow one to install a laser, light or any other accessory. This aids in boosting the efficiency of your versatile small firearms as well increase the protection from heat.

Thin mat – Good at what it does, you just want a thin shield to avoid adding mass to the gun or getting caught on things. The aforesaid types of shields should ideally reach only slightly beyond the barrel diamensions.

I purchased an aluminum heat shield from Shotgun Heat Shield that helped me shoot competition rapidly and without much discomfort. It’s probably not much more than a piece of metal, but a good heat shield really changes the game when you just need to keep that shotgun from overheating. Whether you’re out at the range plinking away, or are using your Shockwave for home defense, a heat shield assists you in maintaining a clear sight on the target rather than being concerned about the fact that the barrel is hot.

Improving Your Mossberg Shotgun With Some Heat Shield

 If you own a Mossberg pump-action shotgun or even the widely used Mossberg 500, 590, Maverick 88 shooting shields are easy to install and won’t burn a hole in your pocket. A  mossberg maverick heat shield fits over the barrel and has the extra benefits of centering your hands away from the heat, protecting your hands from burn injury and giving a distinctly tactical touch to your Mossberg.

Advantages associated with integrating a heat shield

 There are several advantages to installing an aftermarket mossberg heat shield:

Heat Dissipation – Covering the barrel, creates a barrier protecting the surface from getting as hot as it would when firing several shots and using the support hand. It is for this reason that aluminum and polymer shields work by dissipating heat much faster when compared to a steel barrel.

Operational Appearance – Mossberg Heat shields cause shotguns to have a modern tactical appeal similar to that of modern military and law enforcement shotguns. This can make your hunting or home defense gun look a lot tougher or more powerful depending on your perception. 

 

Weight Balance – it should be understood that some heat shields make your shotgun more balanced towards the front end providing superb speed while shooting at a target. The impulse of weight is in front of and can make your Mossberg feel and shoot that much smoother.

Varieties of Mossberg heat Shields

Aluminium – Thin aluminum plates provide adequate protection against heat with low weight. Inexpensive and do not requisite much installation.

Polymer – High-temperature polymers protect from heat and cold also due to best insulating properties. Polymer stands up over time but is heavier as compared to other materials which are commonly used.

If you would like your mossberg maverick heat shield 500, 590, Maverick 88 or any other model you own to look and work better than it does now, one of the best accessories that you can add to your shotgun is the heat shield because apart from enhancing the looks of your gun and making it more functional, it is affordable and adds more value to your gun. Look at the different possibilities, which are presented on the internet or in your neighborhood gun store.

Tuning Your Criteria Pump Action Shotgun With Pardner Pump Protector Tactical Stock For Tactical Purpose

For those of you that like pump shotguns and find that you use them for tactical purposes such as home protection or three gun matches, the pardner pump protector tactical stock and a tactical stock is just the upgrade for your firearm. I found a new website recently, called Shotgun Heat Shield, which has several items manufactured for Remington, Mossberg, and Winchester pump action only.

 The pardner heat shield is an oversized vented heat shield and screws into the threads on the end of the barrel to therefore prevent you from burning your hands on a hot barrel. It is compact, lightweight, made from aluminum that is new and has been strengthened for the year 2022. That is why the flaps are kept large enough in order to facilitate maximum air circulation to the holder so one does not have to grapple with heat mirage coming off the barrel that hampers the sight picture. It is easy to uninstall in case you wish to return to the initial default settings of the factory.

                                                     Pardner Pump Protector Tactical Stock
 

Apart from the heat shield they also offer the adjustable tactical stock kit for the kind of shotguns as Mossberg Maverick 88 and Remington 870. This gunsight transformation really dresses up your fundamental hunting autoloader shotgun to look more tactical and enhances the handling with its rubberized grip surface, a length of pull adjustment, and a pleasingly thick recoil pad. The stock kit will provide stability and create confidence for tactical purposes that include target acquisition and repeating the shots while managing the recoil. 

If you’re qualifying your pardner pump protector tactical stock with high outputs, be it in cowboy action shooting competitions or high-stress home protection drills, these cheap modifications are definitely for consideration. Compact heat shields protect your hands from the heat, but you don’t need to wear gloves to handle the gun while stock kit not only adds an aggressive look to the normal field gun, it also transforms it into something more tactical and all that for mere dollars. Aren’t they cool: Check your other accessories at the Shotgun Heat Shield site!